Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #3177
    greg lg racing
    Participant

    Hi,that best for ,enduro,racing are DID,DHA, chain,will do a season,at rye with no trouble,, motul. Factory Line chain lube,,,and u u should have no problems,, ,hope that helps,Greg

    #2861
    greg lg racing
    Participant

    Hi u need to connect a cabel from the brake pedal to the brake calaper arm just below or above the bolt that connects the bar to the pedal normally just run a section of old brake cabel around the inside of the pedal and in to the spear hole on the brake calaper arm and cabel clamp them together so if the bar breaks the cabel will still give u some way of stopping the kart ,,if still not shore have a look at all the other karts when u are at the track u will see how it works then all the best greg

    #2271
    greg lg racing
    Participant

    hi brian//the best clutch setting for the pro karts is the standard setting that thay come out of the box like ///magnum clutches are very good/////little bit of brake cleaner sprayed in to the drum//and very little bit of bearing lube sprayed on to the inner roller //from the shaft side //u should have no trouble with then?make shore u fit the inner washer on the shaftside of the engine //or u will crush the roller bearings/and can cause it to sieze/also if u don’t no how old or how many hours the clutchs have done get a new pair ///always get a pair when changing clutches //if u mix then u will end up with one engine pulling better than the other hope this helps greg /////

    #1550
    greg lg racing
    Participant

    lol me to fills very strange to like ros brawn //with no team ha //see ya some time m8 greg

    #1531
    greg lg racing
    Participant

    hi dave sad to here great bunch of guys always enjoyed our early morning chats at the gate ///all the best m8 hope to see u a the track some time as I will be there as joe,s driving for lambo ///greg

    #1529
    greg lg racing
    Participant

    hi adam I will be at the 1st round I will show u how to stop water getting into the engine /changing the plug spacing may work but to much m water getting in will still make it splutter like shit ///also wd40 is no good as it washes away it water u need duck oil spray //sprayed on the engine lead/plugs/switches before it rains it stops water pemertrating and stops any shorting out //?I thnk u have some duck oil in the bits I sold u //will come and have a chat at next round all the best greg

    #1385
    greg lg racing
    Participant

    hi josh yer ufo all the way .richards a great guy and makes a fiiiiing great engine/ we won lots of races plus a championship running UFO engines plus no vat //and as roy said he,s at all the races so any problems he/s there to help so go and order a pair ///if u r quick could have them for round one his number is 07779857366 all the best greg

    #965
    greg lg racing
    Participant

    ALL SOLD

    #941
    greg lg racing
    Participant

    hi yes gearings fixed at 71 tooth sprocket amd 20 tooth clutches //I have 2 sets of used talon 71.s and 98link did dha chain s for sale //in the sale section of the old site and lots of other stuff u may need //we retired form racing last year contact me on 07973692607 /all the best greg

Viewing 9 posts - 1 through 9 (of 9 total)